Your water heater works around the clock, usually without a thank-you. We keep it running with expert repairs, right-sized replacements, and maintenance that adds years to the tank.
Get a Price Quote
Fast Response Times All Brands & Types Honest Quotes
Showering in lukewarm water, or waiting an hour for the tank to recover, is no way to live. Our team pairs homeowners with seasoned plumbers who respond quickly, diagnose accurately, and know what it takes to keep the hot water coming.
AllMajor Brands
LocalTechnicians
HonestQuotes
What Homeowners Call Us For
When It's Time for a New Heater
Not every heater can be saved, and not every home has the right one. These are the two ways we put a better heater in place.
Installing a heater is part plumbing, part gas or electrical work, and part code compliance. Our plumbers handle all three, so the heater runs safely and efficiently from day one. You'll know the full installed price before we start.
A leaking tank can't be patched. Once the steel inside has corroded through, the only fix is a new heater, and we can often install a standard tank the same day or the next. We haul the old unit away, bring the new install up to current code, and give you an upfront price first.
For most Sparks homeowners, a water heater repair usually comes in somewhere between $150 and $600. The part that failed drives the price: an element or thermocouple is a quick, inexpensive fix, while a gas control valve is a bigger job. You'll get an upfront quote from Sparks Water Heater before we touch a single part.
Repair
Typical cost
What it usually means
Heating element or thermostat (electric)Most common electric repair, usually same visit
$150–$350
Most common electric repair, usually same visit
Thermocouple or flame sensor (gas)Pilot lights but will not stay lit
$150–$300
Burner shuts off seconds after lighting
Gas control valveValve will not open or regulate; weigh it against replacement on older tanks
$300–$700
Largest common repair; compare to replacement past 10 years
Anode rod replacementRotten-egg odor or a rod worn down to bare wire
$150–$350
Extends tank life when caught early
T&P relief valveWorn valve replaced with the correct rating
$150–$300
Dripping or discharging valve; water pressure checked too
Dip tube replacementHot water runs out fast, plastic bits in aerators
$150–$300
Cracked tube mixing cold water into the hot supply
Drain valve replacementDrip at the bottom valve, often plastic on older tanks
$100–$250
Drip at the bottom valve, often plastic on older tanks
These are common price ranges, not quotes. We confirm the exact price after diagnosing your water heater.
Factors That Change the Price
Fuel type, because gas valves and burner parts cost more than electric elements
How old the unit is and whether its parts are still stocked
Whether the repair is urgent, after hours, or can be scheduled
Access to the heater, like attic installs or tight closets
When a repair climbs toward the cost of a new heater on an older tank, we'll lay out both prices together, with no pressure either way. Questions about cost? Call (775) 314-3901.
What We Do
Full-Service Plumbing for Your Hot Water
We take on the full range of hot water problems, from worn anode rods and failed gas valves to tankless descaling and commercial high-demand systems, with the hands-on experience the job calls for.
Most failures start small and give you clues first. Below are the warning signs local homeowners run into most, and any one of them is reason enough to call us for a closer look.
Plenty of plumbers sell a new heater the moment yours hiccups. We diagnose first, explain what actually failed, and only recommend replacement when the math genuinely favors it.
Skilled Technicians
We don't cut corners. Our team knows every major brand, from a 15-year-old atmospheric-vent gas tank to the newest condensing tankless unit.
We Fix the Cause
Lasting hot water comes from fixing the cause, not the symptom. We find why your heater failed and deal with that, so you aren't calling us for the same problem next season.
We Get There Fast
When the tank quits the night before a busy day, hours matter. Our local technicians roll out same-day with stocked trucks, ready to repair on the spot.
Your Local Plumbing Team
Local Experience That Makes a Difference
Sparks Water Heater is a plumbing service focused on one thing: keeping hot water flowing in local homes and businesses. Our locally based plumbers understand the conditions that shorten a heater's life here, from hard water that coats elements and scales up tankless heat exchangers to older homes with undersized gas lines and tired venting.
Every plumber on our team is experienced and trained across gas, electric, tankless, and heat pump units. We build every quote around the heater you have and the way you use it. When the hot water quits, you want a team that knows your neighborhood, not a franchise dispatcher hundreds of miles away.
Ready to Talk to a Local Plumber?
One call connects you with a nearby technician who can size up the problem and get you a quote.
Every job runs through the same proven steps, so nothing gets missed and the fix actually lasts.
01
Call Us Anytime
Pick up the phone and dial (775) 314-3901. A few quick questions later, your appointment is on the calendar, frequently the same day.
02
On-Site Assessment
We inspect the whole unit, not just the obvious symptom, and give you a straight answer: what failed, why, and what repair versus replacement really costs.
03
The Work Gets Done
Most repairs finish the same visit, since our trucks carry the common parts. Replacements are installed to code with proper venting, sealed connections, and clean workmanship.
04
Verify and Explain
We check the water temperature at the tap, test the relief valve, confirm there are no leaks, and walk you through what was done. Optional maintenance visits keep the tank flushed, the anode checked, and the heater running efficiently for years.
A leaking tank isn't something to wait out. Here's what our team does from your first call to get it under control.
First
We Pick Up Fast
When you call (775) 314-3901, you reach our local team directly. We listen to what's going on, note the details that matter, and get you on the books, often within hours, with quick guidance on what to do until we arrive.
Next
Technician Arrives On-Site
There's no waiting around for days. A fully equipped plumber pulls up to your home, often same-day, with the parts already on board to diagnose and start fixing right then.
The visit
Fault Found, Hot Water Restored
On the first appointment, the cause gets found and fixed. Our technician works through the burner, controls, venting, and tank and shows you exactly what failed and why.
Ongoing
Keeping It Running
Reliable hot water is the whole point. We verify the repair, note the heater's age and condition, and offer a simple yearly plan that keeps sediment out, efficiency up, and cold showers off your calendar.
No Hot Water Right Now?
Every hour counts when there's water on the floor. Call now and we'll get a technician out to your home as soon as today.
"Water started pouring out of the heater closet at 10 pm on a Saturday. They answered on the second ring, talked me through turning off the water and the breaker, and had a technician out early the next day. New tank installed with a drain pan this time. Calm, fast, and fair."
CL
Chris L.
Sparks, NV
"When our electric tank died we decided to try a heat pump water heater. They walked us through the space and airflow it needs, pointed us toward the utility rebate information, and installed it in a day. We noticed the savings on the very first bill."
PD
Priya D.
Sparks, NV
"Our tankless unit kept flashing an error code and shutting off mid-shower. They traced it to scale buildup and a bad flow sensor and fixed both in one trip. Not a single error code since, and now we know to have it descaled regularly."
NK
Nathan K.
Sparks, NV
Our Promise
Built on Trust, Backed by Results
Your household runs on hot water every single day. Here's what sets us apart from other local plumbers.
Care That Adds Years
Most tank failures are slow, and most of them can be pushed back. A yearly flush clears sediment, an anode rod check stops corrosion before it reaches the steel, and a quick relief valve test confirms the most important safety part works. For tankless units, descaling does the same job.
Experienced Plumbers
We don't send a rookie with a multimeter and a hope. Each technician brings genuine field experience in diagnosis, safe gas and electrical work, and clean installation, the kind of depth that turns a service call into a lasting fix.
Sized Right, Installed to Code
We size every replacement to your household's real hot water demand rather than defaulting to whatever's on the truck. Installations include the details that matter: safe gas or electrical connections, seismic straps where required, and a full leak and temperature test. You get a heater that performs for years, not just on day one.
Where We Work
Serving Sparks, Nevada and Surrounding Communities
We cover every community listed below with same-day and scheduled plumbing service.
Water Heater Repair in Lemmon Valley
Experienced plumbers serving the Lemmon Valley area with upfront pricing and honest advice.
Most repairs typically run between $150 and $600, depending on the part. Thermostats, heating elements, thermocouples, and flame sensors sit at the lower end, while a gas control valve can reach $700. If the tank itself is leaking, repair is off the table, and a replacement typically runs $1,100 to $2,800 installed for a standard tank or $2,800 to $5,500 for tankless. We diagnose the problem first and give you a clear, upfront price before any work begins.
If the heater is under about 8 years old and the problem is a part, such as an element, thermostat, thermocouple, or valve, repair usually makes sense. If water is leaking from the tank body, the hot water runs rusty, or a tank unit is past 10 to 12 years old, replacement is the smarter investment, because a corroded tank cannot be patched. Our plumbers walk you through both numbers honestly so you can decide with real information.
Our plumbers offer same-day and emergency service throughout Sparks, Nevada. Our trucks carry the most common parts (heating elements, thermostats, thermocouples, flame sensors, relief valves, and drain valves), so most repairs are finished in a single visit. When a tank does need replacing, standard sizes can often be installed the same day or the next.
For many households, yes. Tankless units heat water on demand, so you do not run out during back-to-back showers, they take up little space, and they often last 20 years or more compared with roughly 8 to 12 for a tank. They cost more to install, especially when a gas line or venting has to be upgraded, and they need periodic descaling in hard water. We size the unit to your peak demand in gallons per minute and give you honest numbers before recommending one.
Yes. Our plumbers work on all major residential and commercial brands and every common type: gas and electric tank heaters, tankless units, heat pump (hybrid) models, and larger commercial systems. We carry universal parts on the truck and can source brand-specific components quickly when needed.
Yes. A water heater is part of your plumbing, so the work goes to plumbers in Sparks, Nevada who handle the whole job: the water supply lines, shutoff valves, gas connection or electrical circuit, venting, relief valve piping, drain pan, and expansion tank, along with the heater itself. One call covers the repair or install and the plumbing around it.
Leaking Tank? Call Now.
The longer a struggling heater limps along, the more it costs you. One call gets you same-day service and a clear quote from plumbers who know Sparks, Nevada.